Weight 740 lbs
Dimensions L 44 x W 79 x H 84 in
HOME LIFETIME WARRANTY
Lifetime on everything to the original purchaser when used only in a HOME environment, applies to defects from manufacturer only.
*See Owner’s Manual for details.
LIGHT COMMERCIAL WARRANTY
10 YEARS: Structural main frames, welds, cams and weight plates.
5 YEARS: Pivot bearings, pulleys, bushings, guide rods and gas shocks.
1 YEAR: Cables, linear bearings and pull-pin components.
6 MONTHS: Upholstery, finish and rubber grips.
ALL OTHER PARTS not mentioned, one year from the date of purchase to the original purchaser.
Light Commercial Use: Light Commercial warranty applies only to facilities like hotels, apartment complexes, personal training studios, fire & police stations, etc. where the equipment would be used by no more than 30 people per day.
Frame
2 x 3” 11-gauge oval tubular steel frames with a combination of 2 x 2” round tubing.
All welded construction conforming to Structural Welding Code-Steel Standards and Specifications.
All frame bolts and nuts are 3/8” and 1/2” zinc oxide. Meets ANSI specifications.
Finish
Powder coat finish – Platinum Sparkle main frame and Cathedral Gray weight stack protective shields.
Cables
3/16” and 1/8” USA-Made/Certified EXERFLEX PRO® high performance fitness cable.
Cable Ratio
The CXT-200 contains an adjustable cable ratio of 1:4 or 1:2. The 1:4 cable ratio provides extended cable travel while enabling micro 2.5 lb weight increment adjustments. With extended cable travel, users may perform a variety of functional exercises (including fast repetition sports-related training) further away from the machine. As a result, the resistance felt at each handle is approximately 1/4 with single cable hook-up, or 1/2 of the weight selected with dual cables hooked up.
Weight Stacks
Two (2) 150 lb steel weight stacks (optional 200 lb)
Other Specs
3/4” solid steel 1045 (tgp) hard chrome finish guide rods.
1/2” push-pull spring loaded solid steel adjustment pins with ultimate load of 9,040 lb and 46,042 psi sheer strength.
All primary and secondary pivot assemblies are non-friction 2" sealed bearings and 1" solid steel pivot axles.
TuffStuff’s proprietary “flat-groove” 4-1/2” and 3-1/2” fiberglass-impregnated nylon pulleys with sealed roller bearings.
|
